{"product_id":"bathroom-sink-pop-up-drain-with-overflow-chrome-pvc-body-cupc-certified","title":"Bathroom Sink Pop-Up Drain with Overflow Chrome PVC Body cUPC Certified","description":"\u003cp\u003ePVC POP-UP DRAIN KIT: Complete lavatory pop-up drain assembly with chrome trim over a thick-wall PVC body, for standard bathroom sink drain openings on basins with a built-in overflow channel. Stopper, body, tailpiece and the full lift-rod linkage arrive together, so a corroded or seized factory drain comes out and one complete unit goes back in. | STOPS LEAKS AND STICKING: Fixes a pop-up that no longer holds water, a stopper that will not lift or seat, a corroded flange that seeps around the drain hole, or a tailpiece cracked at the threads or the slip joint. A fresh flange gasket, a new pivot ball and an intact tailpiece cover all of those failure points at once. | SPECS AND WHAT SHIPS: Chrome finished flange and stopper cap over a thick-wall PVC drain body and tailpiece. Lift rod and ball rod are metal. 8-1\/2 in. overall from the flange face to the bottom of the tailpiece, sized to the standard lavatory drain hole. Ships with stopper, drain body with overflow port, tailpiece, mounting nut, flange gasket, ball rod, pivot nut, lift rod, clevis strap and screw. Plumber's putty is not included. | CONFIRM YOUR SINK: Look inside the bowl for the small oval overflow opening near the rim. This drain has a side overflow port and only works on a basin with that channel cast in. Then confirm you have at least 8-1\/2 in. of clearance from the flange face down to the trap connection and that the trap is a standard residential P-trap. | FITS STANDARD LAVATORIES: Sized to the pre-cut drain openings used by the majority of residential and light commercial bathroom sinks and vanity tops, regardless of basin brand. The ball-rod linkage ties into any faucet with a vertical lift rod behind the spout, which covers most two-handle and single-handle lavatory faucets in service. | WHY A PVC BODY: PVC does not rust, scale or pit, which is what eventually kills a metal drain body in hard water or under repeated chemical drain cleaner. The trade-off is that a metal-bodied drain takes more abuse at the locknut, so FourHome offers a cast brass version separately for jobs where the body will be wrenched on repeatedly. | TRADE AND PROPERTY UPKEEP: Built for residential service calls, apartment turnovers, hotel guest baths, dormitories and light commercial restrooms. The cUPC listing is what lets it go into permitted work rather than swap-outs only, and one assembly covers the whole drain so a technician carries one box instead of a flange, a tailpiece and a linkage kit. Available to Amazon Business customers for multi-unit and recurring orders. | INSTALL IN 20 TO 30 MIN: Bucket under the trap. Break the slip nut, back off the old mounting nut and lift the old body out of the basin. Bed the new flange in fresh plumber's putty, then tighten the mounting nut from below in small increments rather than one hard pull, which is what cracks a porcelain basin. Connect the ball rod and clevis to the lift rod, and confirm the stopper seats and releases before you seal the trap. | cUPC CERTIFIED, NSF 372: cUPC certified for permitted plumbing work across the US and Canada and NSF 372 lead-free compliant for potable water service, so it can go into new construction, multifamily turnover and light commercial work. The cUPC mark is cast into the drain body itself, so it can be verified on the installed part rather than taken on faith from a carton. | VERIFY BEFORE ORDERING: This is a lift-rod operated pop-up for basins that have an overflow. It does not fit no-overflow basins, which need a sealed body, and it does not fit vessel sinks, kitchen or utility sinks, grid drains, push-button touch-toe drains, or any drain that ties into a garbage disposal. FourHome is an independent aftermarket brand and is not affiliated with any sink or faucet manufacturer.\u003c\/p\u003e","brand":"FOURHOME Store","offers":[{"title":"Default Title","offer_id":52515641393442,"sku":"B0FPB8JHTK","price":19.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/0294\/8642\/files\/61uH3FuWvML._AC_SY300_SX300_QL70_FMwebp.webp?v=1788880074","url":"https:\/\/arlenzone.com\/products\/bathroom-sink-pop-up-drain-with-overflow-chrome-pvc-body-cupc-certified","provider":"Arlenzone.com","version":"1.0","type":"link"}