1/4-Inch Drive 20-200 Inch Pound Torque Wrench Kit (2.26-22.6 Nm) for Carbon Bikes Maintenance, 1/4'' Drive, 72-Tooth Gear Ratchet, 43in1 Set with 30pcs S2 Steel Bits and 9pcs CrV Sockets

High Standard Torque WrenchThe Steinwhale torque wrench with 1/4'' drive has a full metal body to ensure longevity and handling. It is fully tested for accuracy under ISO and ASME Standards. The error of every wrench is within 1% at different torque ranges. With torque ranging from 20-200 in.lb. (2.26-22.6 Nm). You can tackle most of the daily maintenance of your fasteners. The wrench itself is assembled with a 72-tooth Ratchet to simplify every job. | Innovative SettingInstead of fusing every bit with a big socket just to fit the wrenchs 4mm rectangle head, we innovatively use the adapter for you to snap in the bits you want. This setting reduces both weight and size compared to traditional torque wrenches, resulting in more bits and sockets for you to choose from in the same weight and volume. | S2 Steel Bits & CrV SocketsWe've got you covered for all your needs. This set includes 31 carefully selected S2 steel bits that boast exceptional hardness (HRC 60+/-) and durability. 9 CrV Hex sockets ranged from 5-13mm to meet most situations. Additionally, we added an extension rod for the hard-to-reach spots. All in one compact box. | Adjust and ClickSimply pull down the black latch to unlock the wrench. Rotate the handle clockwise to increase the torque, and vice versa. You will get 20 in.lb. (2.26Nm) of torque per round. Each notch on the handle stands for 2 in.lb.(0.226Nm). Release the black latch then lock the torque setting. When applying torque, be very careful to observe the handle when it bends and clicks. That means it has reached the set torque. | Mainenance and Suggested Usage To elongate the effective life of the torque wrench and protect the fasteners you are using, a few suggestions are worth mentioning. 1. Always use the torque wrench to tighten a screw. Never use it to loosen one. 2. Always adjust the torque scale to zero and store it in the box after use. 3. Do not use the torque wrench as a hammer, or apply any extensions on the handle.