Danco HyrdroRight Water-Saving Toilet Tank Repair Kit with Dual Flush Valve, Includes Dual Push Button Handle in Chrome, (HYR460)

WATER-SAVING DUAL FLUSH TOILET REPAIR KIT: Converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The HYR451T combines two products that together will increase your toilets efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve | COMPATIBILITY: The Dual Flush Converter works with standard 2 in. flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. NOT COMPATIBLE with 1.28 GPF toilets, toilets with 3 flush valves, or Mansfield Brand toilets | FLUSH VALVE REPLACEMENT INSTALLATION TIP: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve | IMPORTANT INSTALLATION TIP: Do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve | ELIMINATES TOILET LEAKS: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain; the permafit silicone seal is also chlorine and chemical resistant and will not warp | DUAL-FLUSH LIGHT-TOUCH BUTTON UNIQUE SPLIT HANDLE DESIGN: The short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper this setting is needed 4 out of 5 times. The second complete push button at end is the Full Flush that uses the normal amount of water for solids | DETECTS LEAKS & WATER ADJUSTMENT CALIBRATION: Detects leaks and signals when a leak is found. The Total Repair Kit also can be calibrated to adjust the exact amount of water needed which saves water.