YOA Pool Paint Ocean Blue, 1 Gallon. Suitable for cement, putty, latex paint, walls, floors, outdoor pools, fish ponds, and swimming pools. Perfect for DIY projects.

Preparation: Clean substrate thoroughly. Remove grease, debris, and loose material. For smooth surfaces, sand to create texture and enhance adhesion, preventing peeling. Ensure surface is free of chemical residues and grease. Apply one coat to cracks, then lay polyester fabric before applying another coat. | For optimal results, conduct a small-area test application before full painting to verify surface preparation and suitability. | Mixing ratio: 1:1. Application Method: After cleaning the surface, open the liquid component first. Add approximately half of the powder component and mix thoroughly. Gradually incorporate the remaining powder while stirring. Adjust powder quantity based on desired consistency: use less for thin coats, add all powder for thicker application. If mixture is too thick, add water proportionally to achieve desired viscosity. | Application Environment Requirements:Avoid damp substrates. Do not apply during rain, snow, or high winds. Ambient temperature: 41F - 95F (5C - 35C).Relative humidity: <85%. | Precautions and Storage Requirements: Apply two coats with 3-8 hours between coats. Maintain adequate ventilation during application and drying. Prevent moisture exposure and contact with water. Allow one day for drying before handling. Store in a cool, dry, well-ventilated area away from direct sunlight. Recommended storage temperature: 41F - 95F (5C - 35C).